9000 SERIES: Chamber Maintainers and Retinal Cannulas

---

• 9007 Infusion Cannula
  20g, 2.5mm tip
  6" silicone tubing: ID - 0.75mm (0.030")
  OD - 1.65mm (0.065")
• 9008 Infusion Cannula
  20g, 4mm tip
  6" silicone tubing: ID - 0.75mm (0.030")
  OD - 1.65mm (0.065")
• 9009 Infusion Cannula
  20g, 6mm tip
  6" silicone tubing: ID - 0.75mm (0.030")
  OD - 1.65mm (0.065")

---

• 9010SB Extrusion Cannula (straight, blunt)
  20g x 25mm (1")
  tumble polished edge
  9011SB Extrusion Cannula (straight, blunt)
  19g x 25mm (1")
  tumble polished edge
  9012SB Extrusion Cannula (straight, blunt)
  23g x 22mm (7/8")
  tumble polished edge

---

• 9010ST Extrusion
  Cannula (straight, tapered)
  20g x 25mm (1")
  tapered to 25g, 4mm from end
  tumble polished edge
• 9011ST Extrusion
  Cannula (straight, tapered)
  19g x 25mm (1")
  tapered to 23g, 4mm from end
  tumble polished edge
• 9010AT Extrusion
  Cannula (angled, tapered)
  20g x 25mm (1")
  tapered to 25g, 4mm from end
  1mm distal end angled 45o
  tumble polished edge
• 9011AT Extrusion
  Cannula (angled, tapered)
  19g x 25mm (1")
  tapered to 23g, 4mm from end
  1mm distal end angled 45o
  tumble polished edge

---

• 9010STS Extrusion Cannula with silicone tubing (straight, tapered)
  20g x 25mm (1") tapered to 25g, 4mm from end tubing:
  ID - 0.3mm (0.012");
  OD - 0.6mm (0.025")
  extends 8mm beyond tip
  (can be cut to desired length)
  
• 9011STS Extrusion Cannula with silicone tubing (straight, tapered)
  19g x 25mm (1") tapered to 23g, 4mm from end tubing:
  ID - 0.3mm (0.012");
  OD - 0.6mm (0.025")
  extends 8mm beyond tip
  (can be cut to desired length)
  
• 9010ATS Extrusion Cannula with silicone tubing (angled,tapered)
  20g x 25mm (1") tapered to 25g,
  4mm from end tubing: ID - 0.3mm (0.012"); OD - 0.6mm (0.025")
  extends 8mm beyond tip (can be cut to desired length)
  
• 9011ATS Extrusion Cannula with silicone tubing (angled, tapered)
  19g x 25mm (1") tapered to 23g,
  4mm from end tubing: ID - 0.3mm (0.012"); OD - 0.6mm (0.025")
  extends 8mm beyond tip (can be cut to desired length)

---

• 9020 High Viscosity Fluid Cannula [Peyman]
  16g x 9mm (3/8")
  

---

• 9021 Membrane Dissector [Kingham]
  20g x 25mm (1")
  0.5mm sharp tip angled 45 towards beve

---

• 9022 Subretinal Injector [Lambert]
  20g x 25mm (1")
  tapered to 33g x 7mm
  curved distal end

---

• 9023 Subretinal Aspirator [Landers]
  20g x 25mm (1")
  tapered to 27g x 6mm
  ​angled 2.5mm from tip

---

• 9025 Flute Needle [Charles]
  19g x 25mm (1")

---

• 9029 Membrane Micropick [Eaton]
  20g x 25mm (1")
  tapered to 30g x 5mm distal end
  0.5mm sharp tip angled 50º towards bevel
• 9030 Vitreoretinal Micropick [Glaser]
  20g x 25mm (1")
  tapered to 25g x 3/16" distal end
  0.5mm sharp tip angled 50º towards bevel
• 9031 Vitreoretinal Micropick [Glaser]
  23g x 25mm (1")
  tapered to 27g x 3/16" distal end
  0.5mm sharp tip angled 50º towards bevel

---

• ​9032 Vitreorentinal Cannula [Vander]
  20g tapered to 30g(straight)
  
• 9032A Vitreorentinal Cannula [Vander]
  20g tapered to 30g (angled)

---

• 9033 Subretinal Injector [Glaser]
  20g x 25mm (1")
  tapered to 33g x 3mm distal end (curved)

---

• 9034 Subretinal Injector [Glaser]
  20g x 25mm (1")
  tapered to 33g x 3mm distal end
  (straight)​

---

• 9035 MVR Cannula [Glaser]
  20g x 25mm (1")
  tapered to 33g x 4mm distal end
  angled 1mm from tip

---

• 9036 Subretinal Cannula [Lambert]
  20g x 25mm (1")
  tapered to 33g x 7mm curved distal end

---